FREE SHIPPING OVER $99 - Save up to 15% on fence kits - Save up to 15% or more on fence rolls
Need it shipped now? We're ready!
As of 8/9/2022 we are operating 100% and ALL ORDERS SHIP WITHIN ONE BUSINESS DAY
Fast Free Shipping Over $99
30+ YEARS OF EXPERT ADVICE 855-921-7900

Call Us Toll Free 24/7!
855 921 7900
Item #: 685248510278
Weight: 1.00 lbs.
Price: $499.95
    Include ground sleeves for each diagonal side brace?:

    Include two large ground sleeves for gate?:

    Driveway Gate Width:

    Include no-climb hardware?:

    Update price

    Free shipping over $99 click for details



     Price Each 


    10 foot tall dual leaf driveway gate with space for the gates to swing back and forth with hardware. Includes 2 1/2" support posts/frame with 1 5/8 bracing. Consists of two independent panels that can swing either way, coming together in the middle to latch to each other. One of the panels secures to the ground with a an included drop rod. These gates are a nice design because you can open part of the gate for person access or the entire large opening for vehicle or machine access.

    The width selected is the total opening size. For example, if you select 12 feet wide you will receive two six foot wide panels that give you a 12 foot wide gate.

    Note on gate width: the width selection is the approximate width of the gate including support posts, hardware and space. Please use this width as a guide rather than a rule. If you are working with a specific space please order the next gate width up and cut down the three vertical pieces to fit your space.

    Use the fencing from your fence kit to cover this access gate - no mesh is shipped with the gate. There are 50+ different types of fencing and these gates are universal (they work with all types of fencing - fence mesh).

    Note on no-climb hardware: This hardware is designed to work with our no-climb fence kits. You will need to use your existing fencing to attach to the no-climb gate extenders. If you choose this option, please be aware that your large gate can either:


    Have a permanent canopy across the

    top of your large gate entrance. Depending on the height of your gate, this

    means that if you wanted to drive a vehicle through the gate you would be

    driving under the canopy. It?s not necessarily an issue but you?ll need to make

    sure you have clearance. The gate can swing either way (in or out) with this



    Have no-climb hardware that swings

    with the gate. This means that when you open or close the gate, the overhead

    no-climb hardware and canopy moves with the gate out of the way; overhead

    clearance is completely free. The disadvantage with this setup is that the gate

    can only swing in one direction, which is in towards the no-climb

    hardware. For example, if you have a fence installed to keep your cats in with

    the no-climb extenders pointed inwards to prevent cats from climbing out, this

    driveway gate can only open inwards in this configuration.

    Ground sleeves can also be added as an option instead of or in addition to concrete. Sleeves have a locking set screw to make these gates permanent or removable. Large ground sleeves are 30" long and require one large driving anvil (different from standard driving anvil used with smaller post sleeves that come with fence kits). One large anvil will work with a infinite number of large sleeves.

    Note: large driving anvils work with both large and small sleeves (as used in side braces).

    Note: concrete footings are suggested for gates wider than 10 feet. Sleeves can still be used to make the gate removable but concrete should still be used for proper leverage.

    Active now:Found a lower price? Please email us at we price match