Deer Fencing - Rolls of Metal Deer Fence
This is our category starting page for metal deer fence in different sizes and types. This metal deer fencing is typically used to create a deer fence, or any fence where you want to keep animals in or out. For example: using rolls of fencing to keep deer out or creating a high strength fence to keep deer in (customers that raise deer on their farms, deer containment).
Below, the first orange link will help you choose what you need for your project. Under that are the metal deer fence product links.
These rolls of metal deer fencing, or metal deer fence are shipped full length and not folded in half. We have 8 foot tall metal deer fence, 7 1/2 foot tall metal deer fence, 7 foot tall metal deer fence and so on with different opening sizes (2x4, 2x2 and 1x1). We also have smaller opening size metal deer fence in shorter heights- these rolls of fencing are easily stacked to make them taller; for example, using two 4 foot rolls to make one 8 foot roll with a seam. A good tool to seam them together is a hogringer hand tool with hogrings found here: deer fence tools - When you're building a fence through uneven terrain, it's actually much easier to use two rolls spliced than one large roll. The bottom fence roll can conform to grade and the top fence roll can conform to your finished height. The center seam can take the adjustment up and down, plan for 6" or more of overlap if you have many peaks and valleys.
It's important to note that not all of this metal deer fencing is made the same way. If you can pull and break a sample with your hands it's not going to keep deer out or to contain them. By strength, the 2x4 metal deer fence is the strongest, then 2x2, then 1x1 and the least strong metal deer fence type is the steel web - hexagrid - woven wire hex type deer fence. Some of these hex types can be broken by hand and are not suitable for deer exclusion or containment.
Rolls are shipped wrapped in plastic for protection during shipping. Most rolls have plastic shipping discs to protect each end. Some shorter rolls are shipped in cardboard.
All of our Critterfence brand metal deer fence is different in a few ways, we specialize in:
These fence rolls are hot dip galvanized after welding black PVC coated. This is important because zinc/galvanization is covering the welds after the fence is being made. Other types of metal deer fencing you will find will be hot dip galvanized before welding or the least favorable electro-galvanized. High levels of galvanization are important wherever there is fence to soil contact (especially for a metal deer fence where the base is staked to the ground, or overlapped and staked to the ground to keep deer and other animals out!).
These rolls are also not sold in stores. We exclusively ship directly to retail and wholesale customers our finished product.